How It Works

Step-by-Step Guide

Step 1: Prepare the Skin
Ensure the targeted area is clean and shaved before starting. Avoid using any cosmetics, skincare products, or oils on the area to prevent damage to the device and achieve optimal results.

Step 2: Choose Lamp Head
Select the appropriate lamp head based on the treatment area. Use the small lamp head for precise areas like the face and underarms, and the large lamp head for bigger areas like legs and arms.

Step 3: Wear Protective Glasses
Put on the IPL-Blocker glasses included in the package to protect your eyes from the device's flashes.

Step 4: Power On
Plug in the device and press the power button to turn it on. 

Step 5: Choose Flash Mode

  • Manual Mode: The default setting. Press the flash button once for each pulse.
  • Auto Mode: Press and hold the flash button for 3 seconds to activate. The device will flash automatically upon contact with the skin.

Step 6: Adjust Intensity

  • Short press the power button repeatedly to select your preferred energy level (1-5).
    • Start with the lowest level (1) for your first session and increase gradually as needed.
    • The higher the energy level, the faster you’ll see results, but avoid exceeding what your skin can tolerate comfortably.

Step 5: Use the Device on Target Areas

  • Place the device vertically on the skin, ensuring the light window is fully in contact.
    • For Manual Mode, press the flash button to emit a pulse.
    • For Auto Mode, the device will flash automatically when in contact with the skin.
  • Treat each area 3-4 times without overlapping flashes.

Step 6: Follow a Treatment Schedule

  • Weeks 1-3: Use 3 times per week. Hair growth will begin to slow.
  • Weeks 4-6: Use 2 times per week. Hair will thin, and skin will feel smoother.
  • After Week 6: Use once or twice a month as needed for maintenance until achieving permanent results.

Step 7: Aftercare
Apply a gentle moisturizer to soothe the treated areas after each session.

Additional Tips and Warnings:

  • For darker skin tones, stick to energy levels 1-3 due to higher light and heat absorption.
  • If the device temperature exceeds 55°C, a warning icon will appear, and the flash speed will slow down. Normal operation resumes once the temperature drops below 45°C.
  • The device will shut off automatically after 10 minutes of inactivity.

This step-by-step guide ensures safe, effective, and convenient hair removal at home!